How to

TAP TAP

Resident Request.

1. From a mobile phone added to the system, send an SMS to the intercom using the device/intercom cell number.
2. In the message body, add the message: TAP for single use one-time code, or TAP (number) for multiple entries.
3. Send the SMS.
4. The resident/sender will receive TAP code back via SMS.
5. Forward the received SMS to the visitor/s.

TAPEX via Gate Open

1. The visitor calls the resident via the intercom.
2. The resident opens the gate by pressing the configured digit on the mobile phone.
3. The intercom sends an SMS with a single code to the resident.
4. On exit, the visitor enters the code on the TAP TAP keypad.
5. Gate will open.

TAPEX via SMS

1. From a mobile phone, send an SMS to the intercom using the device/intercom cell number.
2. In the message body, add the message: TAPEX for single use or TAPEX (number) for multiple exits.
3. Send the SMS.
4. The resident will receive an TAPEX code via SMS.
5. Forward the received SMS to the visitor/s.

Canceling TAP TAP and TAPEX

1. To disable all unused codes, SMS the words "TAPEX cancel" or "TAP cancel" to the intercom do not using the "

Visitor use

1. A visitor arrives at the entrance or exit gate.
2. Enters the 5 digit code on the Intercom or TAP TAP keypad.
3. The gate will open.