To have a perfectly working system
...
:
...
- Ensure that all these points are
...
- earthed correctly (remember not to connect your earth on the same line as your electric fence energiser).
...
- Mains(220V)
...
- Surge protector
...
- Transformer
...
- Back Plate
...
- Front Plate
...
- PCB
...
Info title Earthing Tip Remember not to connect your earth on the same line as your electric fence energiser
- Always try and move the antenna around until you find a reception above 20 (Check by dialing *#0002)
...
- Always ensure your signal is above 20 for a consistant GPRS and GSM connectivity.
...
- Do a network survey before installation to ensure that the complex uses the best reception available.
...
Info title Handy SuperCodes *#0002 - GSM Signal Strength
- Test audio
...
- RV1 port on the board is there to help increase or decrease the gain as far as audio is concerned, use this port to adjust volume.
...
- Ensure that the sponge around the microphone is always in place with the hole of the mic and the front plate.
...
- If an upgrade mic is used, drill a 5 mil hole 2 centimeters left of the display(when facing the intercom), and place the mic there.
...
- Always try and have a spare of everything we sell to make troubleshooting the intercom much easier (this is of personal interest). This will help solve problems quicker.
...
- Microphone
- Speaker
- LCD keypad
...
- PCB
...
- Antenna
...
- Transformer
...
- Earth cables
...
- Mic sponge
...
Related articles
Filter by label (Content by label) | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...