...

1. From a mobile phone added to the system, send an SMS to the intercom using the device/intercom cell number.
2. In the message body, add the messageword: 'TAP' (for a single use one-time code), or 'TAP number ' (number) to allow for multiple entries and exits with the same code).
3. Send the SMS.
4. The resident/sender will receive the TAP code back via SMS.
5. Forward the received SMS to the visitor/s.

...

1. The visitor calls the resident via the intercom.
2. The resident opens the gate by pressing the configured digit on the mobile phone.
3. The intercom sends an SMS with a single exit code to the resident.
4. On exit, the visitor enters the code on the TAP TAP keypad.
5. Gate will open.

...

1. From a mobile phone, send an SMS to the intercom using the device/intercom cell number.
2. In the message body, add the messageword: 'TAPEX' (for a single use or TAPEX (number) one-time code), or 'TAPEX number ' (to allow for multiple exits with the same code).
3. Send the SMS.
4. The resident will receive an a TAPEX code via SMS.
5. Forward the received SMS to the visitor/s.

...

1. To disable all unused codes, SMS the words "TAPEX 'TAP cancel" ' or "TAP 'TAPEX cancel" ' to the intercom do not using the ".

Visitor use

1. A visitor arrives at the entrance or exit gate.
2. Enters the 5 digit code on the Intercom or TAP TAP keypad.
3. The gate will open.

...