Procedure for loading firmware onto the MKII PL via the USB port.
This procedure can be used for initial install of firmware or any updating of the firmware. |
Install the generic drivers.
Before installing the firmware, contact Comb Communications for the latest releases. |
Step | Description | Diagram |
1 | Connect the PC or Laptop to the device using a micro USB cable to OTG port on the device. | |
2 | Before powering on the board place a jumper on the jumper block TP1. | |
3 | 1) Connect Power to the device. 2) Power up the device. 3) Wait 10s and remove the jumper. 4) The device is ready for flashing. | |
4 | 1) Open a command window. 2) Change directory to the folder containing the FDT application and Comb firmware. 3) In the command line window, enter the following command: c:\HW_Dev\Releases\CiiS\fdt>swiflash -m "wp85" -i filename Note: The filename can be a full path. eg. C:\Comb\comb-full-wp85-15.1.11.spk | |
5 | If this pop up window is displayed, select “Yes” to continue. | |
6 | Press “Enter” when required. Window will closed. | |
7 | The application firmware is loaded and flashed. |
Related articles
Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.
|